Drive Tek Force Vent and Vector Motors from Transdrive

FORCE VENT AND VECTOR MOTORS

Drive Tek Force Vent Unit IEC90 I/Dia174mm

£200.27 + vat

Force Vent Unit Product Details:

Drive-Tek Force Vent Units are manufactured to the highest standard using high quality components with high volume flow using flow-optimised design and rust resistant materials

With inside Diameter of 174mm Frame Size D90L

*** When fitting to none Drive-Tek or Teco Inverter Rated Motor then consideration to the internal depth must be taken into account. To stop the rear end of the motor fouling with the internal fan. Please see dimention AF1 The force vent is supplied with optional extension tube to increase depth by 60mm Approx to allow for Encoder provision see AF2

Part Number: IEC90 / I/Dia174mm

Drive-Tek Force Vent Unit Features:

  • Fit Drive-Tek or Teco LVED Inverter rated AC Motors or motors with 174mm diameter fixing holes
  • Frame Size D90L
  • Optional extension tube supplied ***
  • Can be used with 230V 1PH AC or 400V 3PH AC
  • Optional extension tube to fit over Encoder if required
  • Inside Diameter of 174mm
  • High volume flow through flow-optimised design
  • Modular system for various applications
  • Sufficient clearance to allow fitting of an Encoder if required
  • EMC-compliant
  • Very good vibration resistance due to robust sheet-metal/die cast housing
  • Galvanized sheet metal, seawater-resistant die cast alloy
  • cURus certified
  • Consistent IP66 protection for all versions
  • Finished RAL7032 Gloss to match TECO LVED and Drive-Tek motors

Drive-Tek Force Vent Units are supplied as standard with a capacitor so they can be wired as 230V 1PH AC or 400V 3PH AC which is very useful if being stocked as a spare part as one unit covers both 1/3PH motor supply

90 Frame Force Vent Rear View
Frame Size D90L
  • 90 Frame Force Vent Rear View
  • Force Vent With Extension Tube
  • Force Vent With Extension Tube Unscrewed

Drive-Tek Force Ventilation Units are designed to fit the the Drive-Tek range of AC motors in frame sizes from D63 to D160 (0.18kW to 18.5kW) (max 15kw 4pole) they can be supplied fitted to the motor of your choice or retro fitted by yourself. The Force Vent Unit has the option of an extension tube to extend the length if an encoder is fitted. Please be aware that different manufactures have different dimensions for the fitting of fan cowls and these are designed to fit the Drive-Tek range of motors we can supply Force Vent units to fit other brands on request.

Standard AC motors are designed for fixed speed operation and when used in conjunction with an AC Drive (inverter) they are subject to conditions which invariably reduce motor performance and life. Typically standard AC motors can operate over a 4: 1 speed range (50 to 12.5Hz) beyond this it is necessary to allow for lack of cooling due to the motor fan running slower and excess heat being created within the motor with the result of burning out the motor.

The easiest way to overcome this problem is to fit a Drive-Tek Forced Vent unit which is an independently powered fan unit that replaces the standard motor fan. The Drive-Tek Force Vent Unit overblows a constant stream of air over the motor and ensures optimal cooling regardless of operating speed.

Typically using a Drive-Tek Force Ventilation Unit with a standard AC Motor and a mid-range AC Drive (Inverter) then a 20:1 (50 to 2.5Hz) speed range should be possible without heat damaging the motor and with a high performance AC Drive (Inverter) and closed loop feedback (Encoder) then 100:1 speed range would be possible. Often referred to as a Inverter rated AC Motor or Variable Speed AC Motor(Always check the AC Inverter Drive performance figures)

Transdrive Force Vent Dimensions
D1 I L K M B D E AF1 AF2
177 105 117 53 30 16 174 5x7 104 163